Apache Tomcat^®

The Java blocking IO implementation (BIO) for both HTTP and AJP has been removed. Users are recommended to switch to the Java non-blocking IO implementation (NIO). As of Tomcat 8.5.17, if a BIO Connector is explicitly configured, rather than failing to start the Connector, Tomcat will automatically switch the Connector to use the NIO implementation and log a warning.

HTTP reason phrases have been removed by default, but can be re-enabled using the

sendReasonPhrase

Comet support has been removed without a direct replacement. Applications using Comet are recommended to migrate to WebSockets.

HTTP/2 is supported for h2 (over TLS, negotiated via ALPN) and h2c (clear text, negotiated via HTTP/1.1 upgrade). HTTP/2 needs to be explicitly enabled for a connector. To enable it, insert

<UpgradeProtocol className="org.apache.coyote.http2.Http2Protocol" />

Tomcat 8.5 supports multiple TLS virtual hosts for a single connector with each virtual host able to support multiple certificates. Virtual host definitions are nested inside the Connector element with the default specified using the defaultSSLHostConfigName attribute on the Connector if more than one virtual host is specified. Certificate definitions are nested inside the virtual host.

The following example shows how to use this to configure a single APR/native connector for multiple TLS virtual hosts with each host having both an RSA and EC certificate.

<Connector port="8443"
           protocol="org.apache.coyote.http11.Http11AprProtocol"
           maxThreads="150"
           SSLEnabled="true"
           defaultSSLHostConfigName="openoffice.apache.org" >
    <SSLHostConfig hostName="openoffice.apache.org" >
        <Certificate certificateKeyFile="conf/openoffice.apache.org-rsa-key.pem"
                     certificateFile="conf/openoffice.apache.org-rsa-cert.pem"
                     type="RSA" />
        <Certificate certificateKeyFile="conf/openoffice.apache.org-ec-key.pem"
                     certificateFile="conf/openoffice.apache.org-ec-cert.pem"
                     type="EC" />
    </SSLHostConfig>
    <SSLHostConfig hostName="www.openoffice.org" >
        <Certificate certificateKeyFile="conf/www.openoffice.org-rsa-key.pem"
                     certificateFile="conf/www.openoffice.org-rsa-cert.pem"
                     type="RSA" />
        <Certificate certificateKeyFile="conf/www.openoffice.org-ec-key.pem"
                     certificateFile="conf/www.openoffice.org-ec-cert.pem"
                     type="EC" />
    </SSLHostConfig>
</Connector>

Whilst the Tomcat 8.5 internal API is broadly compatible with Tomcat 8.0 there have been many changes at the detail level and they are not binary compatible. Developers of custom components that interact with Tomcat's internals should review the JavaDoc for the relevant API.

Of particular note are:

• Significant refactoring has taken place throughout the connectors to reduce duplicate code and to align behaviour across implementations.
• The deprecated digest attribute has been removed from the Realm. This must now be configured via a CredentialHandler.
• The AuthenticatorBase implementation has been changed to call doAuthenticate() rather than authenticate() on sub-classes.

The JSR-77 implementation is incomplete and has been removed in 8.5.x. Specifically, the following methods that exposed to JMX have been removed.

• StandardContext.getServlets()
• StandardContext.isStateManageable()
• StandardContext.getDeploymentDescriptor()
• StandardWrapper.isStateManageable()

MessageDispatch15Interceptor had been used to add the Java 5 features to MessageDispatchInterceptor. MessageDispatch15Interceptor has been removed in Tomcat 8.5.x by merging the Java 5 features to MessageDispatchInterceptor.

The support of InstanceListener has been removed in 8.5.x. Specifically, the following classes have been removed.

• org.apache.catalina.InstanceListener
• org.apache.catalina.InstanceEvent
• org.apache.catalina.util.InstanceSupport

The following session manager attributes have been completely removed in 8.5.

• distributable
• maxInactiveInterval
• sessionIdLength

The replacements are as follows:

• The distributable attribute has been deprecated in 8.0 and specified value is ignored. This should be configured via the Context. The value is inherited based on the presence or absence of the <distributable /> element in /WEB-INF/web.xml.
• The maxInactiveInterval attribute has been deprecated in 8.0. If the value is specified, a warning log is issued. This should be configured via the Context. The value is inherited based on the value of the <session-timeout> element in /WEB-INF/web.xml.
• The sessionIdLength attribute of Manager has been replaced by sessionIdLength attribute of SessionIdGenerator.

The default CookieProcessor is now the Rfc6265CookieProcessor. The CookieProcessor is configurable per Context and the LegacyCookieProcessor may be used to obtain the 8.0.x behaviour.

The Manager and HostManager web applications are configured by default with a RemoteAddrValve that limits access to those applications to connections from localhost.

The clearReferencesStatic attribute has been removed in 8.5.x.

The Tomcat developers aim for each patch release to be fully backwards compatible with the previous release. Occasionally, it is necessary to break backwards compatibility in order to fix a bug. In most cases, these changes will go unnoticed. This section lists changes that are not fully backwards compatible and might cause breakage when upgrading.

• In 8.5.51 onwards, the default listen address of the AJP Connector was changed to the loopback address rather than all addresses.

  Reference: AJP connector.

• In 8.5.51 onwards, the requiredSecret attribute of the AJP Connector was deprecated and replaced by the secret attribute.

  Reference: AJP connector.

• In 8.5.51 onwards, the secretRequired attribute was added to the AJP Connector. If set to true, the default, the AJP Connector will not start unless a secret has been specified.

  Reference: AJP connector.

• In 8.5.51 onwards, the allowedRequestAttributesPattern attribute was added to the AJP Connector. Requests with unrecognised attributes will now be blocked with a 403.

  Reference: AJP connector.

• In 8.5.64 onwards, the semantics of the HostConfig.check(String) method have changed. Rather than marking the application as serviced before calling the method, the method will mark the application as serviced before checking resources and then un-mark the application as being serviced after the checks are complete. If the application is marked as serviced when the method is called, the method will be a NO-OP.

• In 8.5.70 onwards, Tomcat no longer adds an "Expires" HTTP response header when adding "Cache-Control: private" due to a CONFIDENTIAL transport-guarantee. This will likely cause a change in caching behavior for applications that do not explicitly set their own headers but rely on Tomcat's previous behavior. If you wish to disable caching, you will need to configure it explicitly in your application. See BZ 65513 for more information.

• In 8.5.71 onwards, as a result of the updated fork of Commons FileUpload now using java.nio.file.Files, applications using multi-part uploads need to ensure that the JVM is configured with sufficient direct memory to store all in progress multi-part uploads.

• In 8.5.74 onwards, the system property org.apache.juli.AsyncLoggerPollInterval is no longer used.

• In 8.5.75 and onwards, the JmxRemoteLifecycleListener has been removed. Note that modern JVMs no longer need the features provided by JMXLifecycleListener.

• In 8.5.75 and onwards, the maxSavePostSize attribute on the <Connector> also applies to a request body present when an HTTP/1.1 upgrade is being performed.

• In 8.5.76 and onwards, Tomcat release builds are performed using Java 11 in "Java 7 mode". This should produce a fully-compatible release that should work under Java 7 or later. Any problems you experience such as class-file-version errors, method-mismatch errors, or JVM verifiers should be reported to the Tomcat team immediately.

Select a configuration file, old version and new version from the boxes below and then click "View differences" to see the differences. The differences will be shown in a new tab/window.

Note: If there are no differences you will see an error page.

You can also use a Git command similar to the following from within a working copy:

git diff 8.5.0 8.5.20 -- conf/